+86-15062519149 |   +86-512-58916707 
Product  Center
You are here: Home » Products » Bottle Blow Moulding Machine » Large Bottle Blow Moulding Machine » Full Automatic Plastic Oil Bottle Making Machine
Share to:

Full Automatic Plastic Oil Bottle Making Machine

  • MAXPET-06E

Extra Large Volume Bottle Blowing Series

About Heating System
  • Automatic stretch blow molding machine adopts infrared type heating mode, whose superior thermal-radiation and thermal penetrability provide machine with powerful heating to meet strict preform heating requirement under speedy moving.

  • Infrared heating lamps placed onto three heating zone with 10 sets of independent voltage adjusting module and advanced microcomputer controller, can offer ideal heating for preform in different size.

  • Each lamp's horizontal position is adjustable to keep the machine flexible.

About Clamping System
  • Adopts four-plate type toggle clamping unit to provide powerful clamping force and increase the clamping speed. 

  • Apart from the four-plate type toggle clamping unit, there is a high pressure assistant clamping device that is special designed to get a firm clamping. 

  • Full automatic PET Bottle blowing Bar distance and circuitous type pre-form carrier systems, energy saving 50﹪

About Pneumatic&Control System
  • High response, image high-quality control system, specially support simple USB program upgrade, providing strong guarantee for equipment upgrade, troubleshooting.

  • The servo motor use SMC cylinder.

  • Low-pressure control systems match with FESTO and PARKER


主机参数 Clamping System

模具腔数 Number of Cavities

6 Cavities

6 Cavities

8 Cavities

锁模力 Clamping Force

56000 KG

65000 KG

96000 KG

模具行程 Mold Stroke

90 mm

125 mm

90 mm

拉伸杆行程 Stretching Stroke

260 mm

330 mm

260 mm

底模行程 Botton Stroke

50 mm

50 mm

50 mm

瓶子间距 Cacity Pitch

76.2 mm

114.3 mm

76.2 mm

胚头数 Number of Holder

106 PCS 

92 PCS 

152 PCS 

制品参数 Container 

最大容量 Max.Container volume

600 ml

1500 ml

600 ml

最大瓶子高度 Max.Container Height

260 mm

330 mm

260 mm

最大瓶子直径 Max.Container Diameter

68 mm

105 mm

68 mm

最大瓶坯高度 Max.Prefrom Height

100 mm

140 mm

100 mm

最大瓶子外径 Max.Neck Diameter

38 mm

38 mm

38 mm

理论产量 Theoretical Output

7200 B/H

6000 B/H

9600 B/H

电气参数 Electrical System

加热箱数量 Heating oven qty 

4*4 PCS

5*8 PCS

8*8 PCS

灯管数量 Number of lamp

4*8 PCS

5*9 PCS

8*8 PCS

加热配置功率  Heating Power

64 KW

90 KW

96 KW

电力总容量 Instakked Power

69.5 KW

100 KW

100 KW

电压 Voltage




气源参数 Air System

工作压力 operating pressure

0.7-0.9 mpa

0.7-0.9 mpa

0.7-0.9 mpa

吹瓶压力 blowing pressure

2.5-3.0 mpa

2.5-3.0 mpa

2.5-3.0 mpa

高压耗气量 high pressure air consumption

5.0/30 L/min

5.0/30 L/min

7.2/30 L/min

配置功率 power

60 KW

60 KW

75 KW

冷却水参数 Chiller System

温度范围 temperature




压力 pressure

0.4 mpa

0.4 mpa

0.6 mpa

额定功率 power

5 HP

5 HP

8 HP

外形尺寸 Machine

主机尺寸 Machine Dimension

4.2*2.1*2.2 m

5.2*2.1*2.2 m

6.0*2.1*2.2 m

重量 Machine Weight

6000 kg

7000 kg

7500 kg

A. Stable performance with advanced PLC.

B. Conveying preforms automatically with conveyor.

C. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.

D. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.

E. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.

F.No contamination and low noise with the air cylinder to drive the action instead of the oil pump.

G. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.

H. Strong clamping force with high pressure and double crank links to lock the mold.

I. Two ways of operating: automatic and manual.

J. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.

K. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.

L. Contamination is avoided for the bottle body.

M. Ideal effect of the chilling with the chilling system.

N. Easy installation and starting

O. Low rejection rate: less than 0.3percent.


Q1: Are you a trading company or a manufacturer?

A1: We have our own factory for many years,can give u best service.

Q2: What's your guarantee if we buy your machines?

A2: We offer you high quality machines with 1 year guarantee and free spare parts for 1 year. Meanwhile our engineers have rich experience and have gone to more than 50 countries for installation and commissioning.

Q3: When can I get my machine after I paid?

A3: We will deliver the machines on time as the date we agreed both side.

Q4: How can I install my machine when it arrives?

A4: Our engineer will go to your side as soon as you get your machines ready for testing and teaching your technicians how to run the machines.

Q5: What's the delivery time?

A5: 30-45 days after the T/T deposit or L/C.

Q6: Do you provide customized service?

A6: We can design the machines according to your requirements (material, power, filling type, container and etc), at the same time we will give you professional suggestion by many years industrial experience.

Leave a Message
Leave us a Message


Contact Info

Tel: +86 0512 58916707
Mob: +86 15062519149
Email: manager@fillex-packer.com
Add: Linjiang Green Industrial Park 90m Northeast, X202 Road,Leyu Town 215621, Zhangjiagang City, Jiangsu Province,China .
©Copyright 2020 FILLEX Machinery Co., Ltd. All rights reserved. Designed by leadong