+86-15062519149 |   +86-512-58916707 
Product  Center
You are here: Home » Products » Bottle Blow Moulding Machine » Small Bottle Blow Moulding Machine » 10-20L Extra Large Volume Bottle Blow Moulding Machine

loading

Share to:
sharethis sharing button

10-20L Extra Large Volume Bottle Blow Moulding Machine

Full automatic blow molding machine is suitable for producing PET plastic containers and bottles in all shapes. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc.
Availability:
Quantity:
  • MAXPET-01-20L

  • FILLEX

10-20L Extra Large Volume Bottle Blow Moulding Machine

Bottle Blow Molding Machine:
1. Automatically arrange the preform into the pre-heater, bottle will drop out automatically from mould.
2. Adopting high technology Micro PLC controller. Ensure the machine working properly and stable.
3. Pre-heater use single unit rotation heating design, preform heating center distance smaller, heating speed more faster, compare to old design with double unit rotation heating design, Electricity save 20%.
4. Special mould locking system enables faster mould locking while saves the source a lot.

5. Suitable for mineral water bottle, carbonated beverage, fruit juice bottle, oil bottle, cosmetic bottle.


Process Flow Chart:

photobank


Technical Parameter:


Items
Unit
Model
FL-6C5L
FL-5C5L
FL-4C5L
FL-3C5L
Molding Spec.
Cavity Pitch
mm
190
190
190
190
Preform Heating Pitch
mm
63.50
63.50
63.50
63.50
No.of Cav.
Cav.
6
5
4
3
Container Spec.
Max.Container Volume
L
5
5
5
5
Neck Diameter Range
mm
39-45
39-45
39-45
39-45
Diameter of support ring
mm
57
57
57
57
Max.Container Diameter
mm
180
180
180
180
Max.Container Height
mm
330
330
330
330
Theoretical Output
BPH
6000-6600
5000-5500
4000-4600
3000-3600
Power Spec.
Rated Power
KW
180
168
159
118
Power Consumption
KW
80-90
68-78
58-65
46-56
Compressor Spec.
Blowing Pressure
Mpa
2.8-3.5
2.8-3.5
2.8-3.5
2.8-3.5
Air Consuming
m³/min
16
14
12
9
Main Machine Spec.
Size
mm
11800*3750*3300
9316*3635*3300
8181*3535*3300
7200*3435*3300
Weight
Kg
11500
10500
9500
8000


Features:

1).  Stable performance with advanced PLC.
2).  Automatic preform conveyer to save human cost.
3).  Preform self-rotation and infrared pre-heater revolution assure the even distribution of heat, which improve the bottle
shaping rate, increase the production.
4).  High adjusting performance to enable preheat the preforms perfectly by adjust the voltage control area in the PLC, which could adjust the temperature of the infrared lights in the pre-heater, and keep the proper temperature and humidity invariable.
5).  High safeties with security automatic-locking device in each mechanical action, which will make the production into a perfect safe environment, in case of the breakdown in certain procedure.
6).  Introduce the FESTO air cylinder to avoid contamination and noise.
7).  Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
8).  Strong clamping force with high pressure and double crank links to lock the mould.
9).  Two ways of operating: automatic and manual.
10). Low cost, high efficiency, easy operation and maintenance etc, profited from the fully automatic technological process.

11). Ideal cooling system make the finished bottles without any flaws.

Details Images

photobank (7)photobank (8)photobank (9)photobank (1)

Company Profile

FILLEX was established in 2006,possessed with 10000 square meters standard workshop and more than 60 professional workers.FILLEX has adhered to our long-term concept  of “Packing Ideas”.During the 15 years since establishment of our company, our products are sold to domestic provinces and cities, also to many other countries like the United States, Canada, Ghana, Peru, Russia, South Africa, Vietnam, Philippines, Pakistan, Malaysia and so on. We provide with them solutions for blow molding, water treatment, juice processing system, filling and packaging solutions. They are mainly for liquids such as pure water, fruit drinks, carbonated beverages, beer, condiments , cosmetics and so on.

工厂1

FAQ

Q: What are you main products?
A: Fillex Machinery Co., Ltd. is a 15-year-old manufacturer specializing in the production of complete beverage filling machineryand equipment. Such like : Semi-automatic blow molding machine, automatic blow molding machine, RO water treatment, UF watertreatment, Pure water filling machine, Juice filling machine, Pulp juice filling machine, Beer filling machine, Oil Filling Machine, Wine Filling Machine, Can filling machine, Pet bottle filling machine, Glass bottle filling machine, 5 gallon water filling production line, carbonated soft drink production line, three-in-one filling machine, beverage equipment, etc. bottle unscramber machine, Opp hot glue labeling machine, Shrink Label Machine, shrink wrapping machine, carton packaging machine, UHT, sterilizer, date printer, etc. 
We can help you to build a new beverage factory, can help you design the bottle, design the filling line drawing... Any question about this machine or our factory, please contact us, sincerely serve for you .

Q: How can I install my machine when the blowing machine arrives?
A: We will send the engineers to help you install and test the machines, but the Visa fee, round tickets, accommodation, eating, and the allowance of 80USD per day per person will be on customer's side.
Or the customer can send the engineer to our company to complete the inspection of the goods, as well as the installation and training lessons, but the Visa fee, round tickets, accommodation, eating, and the allowance will be paid by customers .

Q: What's your guarantee or the warranty of the quality of the bottle blowing machine?
A: We offer you high quality machines with 1 years guarantee. we will give u free spare parts in 1 years. If during the warranty period, the quality or specification of the goods is found to be inconsistent with the contractual requirements, or if the goods are found to be defective (including potential defects or the use of unqualified materials, etc.),
the buyer has the right to use the inspection documents issued by the statutory authority. During the warranty period of the
goods, the buyer shall make a claim against the seller.

Q: Where is your company located? How can I visit there?
A: Our factory is located in zhangjiagang City, Jiangsu Province, China.
You can fly to Shanghai Pudong International Airport and we are warmly welcome to visit us.(Provide pick-up service.)

Q: How can l get some samples?
A: We have no sample.we will send you more pictures and video about this machine, and welcome to visit our factory to see the machine running in the factory.

Q: How about the quality of your blowing machine?
A: Our company guarantees that the products provided are brand new, unused, with the latest design and suitable materials, and comply with the quality, specification and performance of the contract in all respects. And all the electric element we all use the famous brand around the world, such like Schneider, Mitsubishi etc.

Q: What's the delivery time of your blowing machine?
A: 7-45 days after the T/T deposit or L/C.(The premise is to receive customer’s samples and deposit).


Q: What about Product’s material and configuration use?
A: 304 stainless steel, the machine frame material is iron. According to customer requirements, 316 stainless steel is available, complete machine stainless steel, and customers demand specified configuration.




Previous: 
Next: 
Leave a Message
Leave us a Message

Products

Contact Info

Tel: +86 0512 58916707
Mob: +86 15062519149
Email: manager@fillex-packer.com
Add: Linjiang Green Industrial Park 90m Northeast, X202 Road,Leyu Town 215621, Zhangjiagang City, Jiangsu Province,China .
©Copyright 2020 FILLEX Machinery Co., Ltd. All rights reserved. Designed by leadong

Feedback