+86-15062519149 |   +86-512-58916707 
Product  Center
You are here: Home » Products » Blowing Filling Capping Combiblock » 18000BPH Combi Block Pure Water Mineral Water Blowing Filling Capping Machine


Share to:
sharethis sharing button

18000BPH Combi Block Pure Water Mineral Water Blowing Filling Capping Machine

new type combi, linear type blowing machine combine with filling and capping, to be tri-block blowing-filling-capping machine; space save, energy save etc;
  • FL B-F-C


Plastic Bottled Pure Water Carbonated Blowing Filling Capping Combiblock Machine

Products Description

The blow-filling and screwing integrated machine is based on the "blow bottle unit", "filling unit" and "capping unit". Through the comprehensive application of multiple disciplines such as light, mechanics, electricity, and gas, the servo system is used for synchronous control. Realize the integrated control and production of multiple unit equipment, improve the production efficiency of the whole line, reduce investment costs, reduce energy consumption and equipment maintenance costs.

Product Paramenters

Model FL-06 FL-08 FL-10 FL-12 FL-14 FL-16 FL-18
Number of Cavity 6 8 10 12 14 16 8
Production Capacity(BPH) 12000 16000 20000 24000 28000 32000 36000
Volume(L) 0.2-2
Power(KW) 40 50 65 80 95 110 125
Chilled Water Die Cooling Flow Rate(m3/h) 5 6 7 8 10 12 14
Temperature Heating Flow Rate(m3/h) 2.5 3 3 4 4 5 5
Comperssed Air Pressure(bar) 35
Gas Consumption(m3/min) 6.7 8.5 10 12 14 15.5 17

Details Images

Bottle Blowing Unit: The manipulator transfers the heated preform to the mold along a certain cam curve. The preform is stretched and pre-blown, and then blown into a bottle shape by high-pressure air. The robot arm conveys the blown bottle outward along a certain cam curve.

Plastic-Bottled-Pure-Water-Carbonated-Blowing-Filling-Capping-Combiblock-Machine.webp (1) Filling Unit: The blown bottles are transferred to the filling machine through the transition wheel. The bottle entering the filling machine is held by the bottle clamp on the lifting cylinder, and it rises and falls under the action of the cam. The filling machine adopts the gravity filling method, the bottle mouth rises to open the filling valve to start filling, and the filling ends when the material rises to the position where the air return hole is blocked. After the filling is finished, the bottle mouth drops and leaves the filling valve.

Capping Unit: The bottle enters the capping machine through the transition wheel. The anti-rotation knife on the capping machine jams the bottleneck to keep the bottle upright and prevent it from rotating. The capping head keeps revolving and rotating on the capping machine, and realizes the actions of capping, capping, capping, and capping under the action of the cam to complete the entire capping process. The finished bottles are transferred from the capping machine to the bottle-out conveyor chain through the bottle-out dial, and then the three-in-one filling machine is sent out by the conveyor chain.

Plastic-Bottled-Pure-Water-Carbonated-Blowing-Filling-Capping-Combiblock-Machine.webp (2) Preform Feeding and Discharging: the preforms enter the elevator from the blank feeding hopper and are conveyed to the blank sorting device. Through blank discharging, the preforms are automatically arranged into the star wheel and sent to the heating zone. The processing of billets is fully automatically controlled, and the efficiency of billets is high without hurting the preforms.
Plastic-Bottled-Pure-Water-Carbonated-Blowing-Filling-Capping-Combiblock-Machine.webp (3)Warmer Heating: the loaded preform is carried by the reversible mandrel, and the mandrel smoothly turns the preform into a state where the bottle mouth is downward and the body is upward. This state is beneficial to the bottle mouth. The threaded part is in the state of heat insulation protection process. At the same time, the mandrel carrying the preform is still rotating at a constant speed under the drive of the revolution chain, and passes through the outer heating light box and the inner cooling system at a constant speed. The system is equipped with 9 infrared heating lamps. Make the entire preform get the right process temperature

Plastic-Bottled-Pure-Water-Carbonated-Blowing-Filling-Capping-Combiblock-Machine.webp (4) Packing&Shipping

Company Profile
FILLEX was established in 2006,possessed with 10000 square meters standard workshop and more than 60 professional workers.FILLEX has adhered to our long-term concept of "Packing Ideas".During the 15 years since establishment of our company, our products are sold to domestic provinces and cities, also to many other countries like the United States, Canada, Ghana, Peru, Russia, South Africa, Vietnam, Philippines, Pakistan, Malaysia and so on. We provide with them solutions for blow molding, water treatment, juice processing system, filling and packaging solutions. They are mainly for liquids such as pure water, fruit drinks, carbonated beverages, beer, condiments , cosmetics and so on.
Q1:Are you a trading company or a manufacturer?
A1:We have our own factory for many years,can give u best service .

Q2:What's your guarantee or the warranty of the quality if we buy your machines?
A2:We offer you high quality machines with 1 year guarantee . we will give u spare part free in 1 year,
Life long after service. Mean while, our engineers go more than 50 countries for debugging, with rich experience.

Q3:When can I get my machine after I paid?
A3:We will deliver the machines on time as the date we agreed both side.

Q4:What's the delivery time?
A4:30-45 days after the T/T deposit or L/C.

Q5:What's min order quantity?
A5:1 unit


Leave a Message
Leave us a Message


Contact Info

Tel: +86 0512 58916707
Mob: +86 15062519149
Email: manager@fillex-packer.com
Add: Linjiang Green Industrial Park 90m Northeast, X202 Road,Leyu Town 215621, Zhangjiagang City, Jiangsu Province,China .
©Copyright 2020 FILLEX Machinery Co., Ltd. All rights reserved. Designed by leadong